rapidos
I need your help. Do you know what relay (K31) should I put to reduce turning lights speed please ?
http://www.speedsterclub.nl/bibliotheek ... 0panel.pdf
Thanks.
http://www.speedsterclub.nl/bibliotheek ... 0panel.pdf
Thanks.
-
- Mega lid in de orde van gouden nietje
- Berichten: 2177
- Lid geworden op: 06 dec 2006 20:14
- Locatie: Alkmaar
I'll do my best, but the turn signal unit K31 is build for the resistance of normal light bulbs. (therefore it flashes quicker when 1 bulb is broken...)
I would keep the standard relay and adjust for the resistance of your LED units. Looking to the diagram (http://www.speedsterclub.nl/bibliotheek ... 0lamps.pdf) you probably only need to change the resistance in the output wire on pin 3 of K31.
I would keep the standard relay and adjust for the resistance of your LED units. Looking to the diagram (http://www.speedsterclub.nl/bibliotheek ... 0lamps.pdf) you probably only need to change the resistance in the output wire on pin 3 of K31.
- joel do desert
- Actief lid
- Berichten: 104
- Lid geworden op: 21 jul 2005 20:25
- Locatie: Neerijnen
Rapidos,
I had the same problem and I've changed the relay for a LED FLASHER FLASH RELAY see link.
http://cgi.ebay.nl/ws/eBayISAPI.dll?Vie ... SA:NL:1123
I had the same problem and I've changed the relay for a LED FLASHER FLASH RELAY see link.
http://cgi.ebay.nl/ws/eBayISAPI.dll?Vie ... SA:NL:1123
- Smiley
- Groot Speedster Commandeur
- Berichten: 7343
- Lid geworden op: 10 jul 2008 21:46
- Locatie: Etten-Leur
This may interest you:
http://www.vx220.org.uk/forums/index.ph ... or-z20let/
http://www.vx220.org.uk/forums/index.ph ... or-z20let/
Het leven is geen sprookje.
Als jij rond middernacht je schoen kwijt bent, dan heb je gewoon teveel gezopen.
Als jij rond middernacht je schoen kwijt bent, dan heb je gewoon teveel gezopen.