Carbon Fibre Gear Lever Suround en centre lower console
- Dominique
- Mega lid in de orde van Zilveren nietje
- Berichten: 1663
- Lid geworden op: 15 jan 2006 22:01
- Locatie: Noord Holland
Carbon Fibre Gear Lever Suround en centre lower console
Na een succesvolle group buy op het UK forum heeft Stefan een group buy gestart voor auto's met het stuur aan de linker kant. Hier is de LINK
on een idee te geven van de kosten:
Price will be £220 for the center consol and £65 for the forward consol inc VAT and estimated delivery to mainland Europe is £20. You can order one of the two pieces or both.
Zowel op het Engelse forum als op het Duitse hebben leden ge-post zeer tevreden te zijn over de kwaliteit.
on een idee te geven van de kosten:
Price will be £220 for the center consol and £65 for the forward consol inc VAT and estimated delivery to mainland Europe is £20. You can order one of the two pieces or both.
Zowel op het Engelse forum als op het Duitse hebben leden ge-post zeer tevreden te zijn over de kwaliteit.
- Maik
- Groot Speedster Commandeur
- Berichten: 6850
- Lid geworden op: 03 dec 2004 18:03
- Locatie: Zuid-Holland
Stefan A heeft hier toen toch ook gepost voor de andere CF onderdelen? Voor de dash plates in ieder geval dacht ik...
Edit: ja dus: http://www.speedsterclub.nl/phpBB2/view ... 34&start=0
Edit: ja dus: http://www.speedsterclub.nl/phpBB2/view ... 34&start=0
-
- Nieuw lid
- Berichten: 17
- Lid geworden op: 15 mar 2008 15:57
- Locatie: Helsingborg, Sweden
- Contacteer:
Door cards, handle guards and dash panel bits were made by Carbontec. Unfortunately they had a fire before christmas so they are currently out of business. Shame, since their products where great quality (although delivery time was somewhat long during summer).
The guy making these console bits has made them for the VX220 guys already and they seems please with them. Also, one of the German guys has already received a center console for the Speedster. I've sent my lower consol to him to get a mould done for it since that part differs from the VX220 lower console.
The guy making these console bits has made them for the VX220 guys already and they seems please with them. Also, one of the German guys has already received a center console for the Speedster. I've sent my lower consol to him to get a mould done for it since that part differs from the VX220 lower console.
- Dominique
- Mega lid in de orde van Zilveren nietje
- Berichten: 1663
- Lid geworden op: 15 jan 2006 22:01
- Locatie: Noord Holland
Dat is exact hetgene waar LHD en RHD in verschillen! Bij de Engelse jongens bestaat hij uit 2 delen en is hij lager, bij onze Europese auto's is het één deel, en is bovendien iets hoger. De foto's zijn van een RHD Duitse auto!vauxhall schreef:wat is dat aluminium U-stuk voor de forward-consol?
die forward-consol zelf is toch ook veel lager dan het origineel?
't Zal te maken hebben met het pedaal waar je passagier bij kan. gas of koppeling
edit: Zo ziet het er ,met uitzondering van Pipo, bij ons uit:
Het origineel weegt 680gr.
@Piet, ik zal zo ff copy-pasten.
Laatst gewijzigd door Dominique op 13 jan 2009 22:37, 3 keer totaal gewijzigd.
- Dominique
- Mega lid in de orde van Zilveren nietje
- Berichten: 1663
- Lid geworden op: 15 jan 2006 22:01
- Locatie: Noord Holland
Hier is de text die Stefan op VX220.org.uk heeft gezet:
1.
2.
3.
Ik zal later op de avond nog wat meer foto's plaatsen.
Het is natuurlijk het handigst als er een centrale lijst op het UK forum blijft, maar ik heb reeds gesproken met Stefan, en wil best de Nederlandse ambassadeur zijn.Stefan schreef:I've been in contact with Scott regarding center consol and lower consol for us in LHD cars as well. The cut-outs are mirrored on the center consol and the lower consol is different from the RHD version. Pieces will be made by the same guy as did them in the previous group buy for the RHD people. Link to the previous group buy HERE
Price will be £220 for the center consol and £65 for the forward consol inc VAT and estimated delivery to mainland Europe is £20. You can order one of the two pieces or both.
I've sent my lower console to be used as mould, but apart from that I have no other interest in this business. I'll keep this open for two weeks, and then I'll send the list to Scott.
1.
2.
3.
Ik zal later op de avond nog wat meer foto's plaatsen.
- Dominique
- Mega lid in de orde van Zilveren nietje
- Berichten: 1663
- Lid geworden op: 15 jan 2006 22:01
- Locatie: Noord Holland
Ja Maik, dat vloekt ongelooflijk met die matte dash plates van jou.
(waterproof, korrel 600 of 1200, en je interieur is helemaal af!) Dat een handige jongen als jij daar niet zelf mee komt . . .
@ Piet, ik zal jou naam in de lijst op UK forum zetten.
1. Dominique, centre + lower console
2. Piet, center console + lower console
3.
edit: en zoals beloofd:
( ik heb de url links gepost, de plaatjes zijn een beetje groot)
http://img79.imageshack.us/img79/6202/image023ro1.jpg
http://img79.imageshack.us/img79/4461/imag0020dz1.jpg
http://img514.imageshack.us/img514/1457/imag0021ti8.jpg
(waterproof, korrel 600 of 1200, en je interieur is helemaal af!) Dat een handige jongen als jij daar niet zelf mee komt . . .
@ Piet, ik zal jou naam in de lijst op UK forum zetten.
1. Dominique, centre + lower console
2. Piet, center console + lower console
3.
edit: en zoals beloofd:
( ik heb de url links gepost, de plaatjes zijn een beetje groot)
http://img79.imageshack.us/img79/6202/image023ro1.jpg
http://img79.imageshack.us/img79/4461/imag0020dz1.jpg
http://img514.imageshack.us/img514/1457/imag0021ti8.jpg