Chris Tullett 2,5" of 3", 4-1 voor de 2,2!!
Geplaatst: 12 mei 2009 18:58
Zojuist gespot op het UK forum als groupbuy:
VX220.ORG.UK (je zult je vast moeten registreren.)
Munchervoor plaatjes van de bouw.
Ik heb veel met laswerk te maken via mijn werk, en kan niet anders zeggen dan dat ik dit voor een uitlaatsysteem er echt heel goed uit vind zien.
Voor wie niet uit nieuwsgierigheid wil gaan registreren heb ik hieronder de text geplakt:
Chris Tullett has asked me to post this up for him, nothing in this for me and you will be dealing directly with him though I will answer questions where I can.
Chris has developed two systems on my car, which I've tested and am very happy with.
2.5" Equal Length 4-1 Manifold £388.38 + VAT
2.5" 100 cell CAT Downpipe £297.96 + VAT
2.5" Silencer/Link Pipe £392.66 + VAT
3" Equal Length 4-1 Manifiold £398.14 + VAT
3" 100 cell CAT Downpipe £320.17 + VAT
3" Silencer/Link Pipe £402.66 + VAT
The workmanship on his products is second to none, the quality of the welds are fantastic. The 2.5" manifold is of full equal length (as is the 3") so will perform as well as, if not better than the TMS £1,000 version, (which Chris made but did not design). His design is much simpler allowing for a lower price and importantly greater clearance to the boot face.
Chris has generally made very few off the shelf systems as all his work is custom one off projects for race teams, world touring car, historical F1, manufacturers, DTM teams etc
The 3" system which I've run with for a while sounds fantastic, and is sensible in the volume it produces (max 96db tested before it had run in) and should have no problems passing noise tests on track.
Both systems can be made repackable as a cost option (although after opening my first back box up it was all as it should be).
Both systems are also extremely light, I don't have the figures to hand but I think they are the lightest out of any available for the VX. iirc my 3" system was less than half the weight of the standard system.
The above prices are valid on the basis that at least 10 full systems are ordered before the end of May. After that prices will rise by 15%.
Lijkt mij met de huidige GBP koers een goede deal, en de SC-boys zouden in hun nopjes moeten zijn met een 3" systeem van deze kwaliteit als alternatief voor de Miltec.
Ik ga ff kijken wanneer ik mijn vakantiegeld vang!
VX220.ORG.UK (je zult je vast moeten registreren.)
Munchervoor plaatjes van de bouw.
Ik heb veel met laswerk te maken via mijn werk, en kan niet anders zeggen dan dat ik dit voor een uitlaatsysteem er echt heel goed uit vind zien.
Voor wie niet uit nieuwsgierigheid wil gaan registreren heb ik hieronder de text geplakt:
Chris Tullett has asked me to post this up for him, nothing in this for me and you will be dealing directly with him though I will answer questions where I can.
Chris has developed two systems on my car, which I've tested and am very happy with.
2.5" Equal Length 4-1 Manifold £388.38 + VAT
2.5" 100 cell CAT Downpipe £297.96 + VAT
2.5" Silencer/Link Pipe £392.66 + VAT
3" Equal Length 4-1 Manifiold £398.14 + VAT
3" 100 cell CAT Downpipe £320.17 + VAT
3" Silencer/Link Pipe £402.66 + VAT
The workmanship on his products is second to none, the quality of the welds are fantastic. The 2.5" manifold is of full equal length (as is the 3") so will perform as well as, if not better than the TMS £1,000 version, (which Chris made but did not design). His design is much simpler allowing for a lower price and importantly greater clearance to the boot face.
Chris has generally made very few off the shelf systems as all his work is custom one off projects for race teams, world touring car, historical F1, manufacturers, DTM teams etc
The 3" system which I've run with for a while sounds fantastic, and is sensible in the volume it produces (max 96db tested before it had run in) and should have no problems passing noise tests on track.
Both systems can be made repackable as a cost option (although after opening my first back box up it was all as it should be).
Both systems are also extremely light, I don't have the figures to hand but I think they are the lightest out of any available for the VX. iirc my 3" system was less than half the weight of the standard system.
The above prices are valid on the basis that at least 10 full systems are ordered before the end of May. After that prices will rise by 15%.
Lijkt mij met de huidige GBP koers een goede deal, en de SC-boys zouden in hun nopjes moeten zijn met een 3" systeem van deze kwaliteit als alternatief voor de Miltec.
Ik ga ff kijken wanneer ik mijn vakantiegeld vang!
